Register  ·  Sign In  ·  Help
Jump to Page:   1
SPA2102-NA limiting speeds to 7500kbps
Options    Options  
jb_008
Regular visitor
Posts: 3
Registered: 09-01-2006


jb_008

Message 1 of 2

Viewed 757 times


I have tested multiple SPA2102-NA versions and have found all of them are limiting speeds on the download to 7500kbps.  I thought at first this might be an MTU problem so I tested for that, but it appears to be correctly set at 1500 in the firmware.  If I plug into directly any internet connection that is faster than 7500kbps, I get the full speed of the connection. The minute I put the spa in between speeds cap out at 7500kbps.  I have talked to many others with the same problem, I am kind of surprized linksys still has not fixed this as it has been in every firmware version for this model.  I have RT31P2-NA's as well and they work fine so its clearly just to do with these models.  Anyone else notice this too?
Kudos!
02-08-2009 03:35 PM  

  Reply   Reply  
Re: SPA2102-NA limiting speeds to 7500kbps
Options    Options  
jb_008
Regular visitor
Posts: 3
Registered: 09-01-2006


jb_008

Message 2 of 2

Viewed 755 times


I should also mention I did quite a bit of troubleshooting on these, I have turned off the qos as well. changed it to on when the phone is in use, changed the uplink speed...  I have full access to the admin section, and can't find anything that would be restricting these.

 

Just made a small discovery just now while playing around.  If I put the ata into bridge mode instead of nat I get the full speed of the connection, so clearly nat is doing something to restrict the speeds on here.

 

To give you an idea, speed wise with NAT enabled I get 7000kbps/2300kbps down/up

On the same line with the Bridge mode I get 83843kbps/18607kbps.

 

This is quite a big different and nat is really choking the connection.

 

 

Kudos!
02-08-2009 04:27 PM  

  Reply   Reply  
Jump to Page:   1