|
|
|
|
|
Home :
Specialty Products :
Range Expanders :
Re: WRE54G after reset only 1 blue light, no activity light
|
|
|
|
|
|
|
|
|
WRE54G after reset only 1 blue light, no activity light
|
|
cmku
Newbie
Posts: 3
Registered: 07-26-2007
Message 1 of 3
Viewed 2,379 times
|
|
I have spent a lot of frustrating hours trying to setup my newly bought expander WRE54G.
Issues:
1. I could not find my expander by typing 192.168.1.240
2. So, I tried one of the reset tips I found here, by holding the reset button for 30 seconds, unplug it while pressing down reset, wait 15 secs, while holding reset and turn on power again, and then wait further 10 seconds.
3. After having tried this, when I turn it on, there is only one blue light on the link button, no light on the activity, and I could not see my expander at all on the wifi network. (A normal reset would give me a red light on the link & a blue flashing light on the activity, and I was able to see my expander on the network)
Is there any way to undo what I did with the reset tip? I really want to restore it to factory defaults.
My WRE54G does not say whether it is V1 or V2, so I guess it is V1?
Anyone please help!!!
|
|
|
|
07-26-2007 03:09 AM
|
|
|
|
|
|
Re: WRE54G after reset only 1 blue light, no activity light
|
|
binky
Junior specialist
Posts: 1912
Registered: 09-07-2006
Message 2 of 3
Viewed 2,368 times
|
|
go to www.linksys.com/download and download the latest firmware for the expander...logon to expander's setup page and try upgrading firmware on the expander, after reflashing firmware on the expander reset it and reconfigure it...let me know the results. |
|
|
|
07-27-2007 04:33 PM
|
|
|
|
|
|
|
|
|
|
