|
|
|
|
|
Home :
Routers and Access Points :
Access Points :
Re: Power Supply for WAP54G V3
|
|
|
|
|
|
|
|
|
Power Supply for WAP54G V3
|
|
kemmatech
Newbie
Posts: 3
Registered: 11-10-2009
Message 1 of 6
Viewed 663 times
|
|
|
Hi, I was wondering if someone could help me identify the power supply specs for a WAP54G V3. I searched high and low on the Net and there seems to be lots of conflicting info. I found the specs for a WAP54G V3.1, but I have the plain V3, so I'm not sure if that's the same thing or if it requires different specs. If anyone out there has a V3, would you mind checking your adapter and reporting back? Thanks!!! Jonathan
|
Solved!
 Go to Solution
|
|
|
11-10-2009 02:15 PM
|
|
|
|
|
|
Re: Power Supply for WAP54G V3
[ Edited ]
|
|
FredZ
Network Administrator
Posts: 1924
Registered: 07-21-2007
Message 2 of 6
Viewed 653 times
|
|
|
All WAP54Gs use the same power supply. 12VDC @ 1A You can run them off a standard car battery. They consume about 6W with factory firmware and settings. Regards Fred Message Edited by FredZ on 12-11-2009 05:58 AM
|
|
|
|
11-11-2009 09:56 AM
|
|
|
|
|
|
|
|
Re: Power Supply for WAP54G V3
|
|
kemmatech
Newbie
Posts: 3
Registered: 11-10-2009
Message 4 of 6
Viewed 638 times
|
|
|
LOL, thanks guys, but this is what I mean about conflicting info. Two responses to my original question--one person says it's 500MA and the other person says it's 1A. I appreciate the help, but which one is it actually? In response to the person who said it was 1A, are you basing this on what the power adapter actually says or from memory? Thanks, Jonathan
|
|
|
|
11-11-2009 01:52 PM
|
|
|
|
|
|
Re: Power Supply for WAP54G V3
|
|
FredZ
Network Administrator
Posts: 1924
Registered: 07-21-2007
Message 5 of 6
Viewed 635 times
|
|
|
I have a genuine Linksys PSU for WAP54G in my hand. Model: 12100SA Input: 240V 50Hz 110mA Output: 12VDC 1000mA Made in China Given the consumption of a WAP54G is 6W (500mA @ 12VDC) a 500mA PSU would be operating at 100% at all times. It doesn't take a rocket scientist to work out any likely scenarios (problems) 12VDC @ 1A (1000mA) is your solution. Regards Fred
|
 Accepted Solution
|
|
|
11-11-2009 02:22 PM
|
|
|
|
|
|
|
|
|
|
